Action Camera and Accessories
GadgetiCloud offers you the best offer of Action Camera and Accessories.
The series, includes the best deal from GadgetiCloud of Action camera and accessories, including but not limited to the lens, mods, protective case, cold shoes, action camera.
Come and see if there are any accessories that can supplement your fascinating photography journey~~~
Insta360 ONE X2 Battery/Fast Charge Hub
Insta360 ONE X2 Action Camera Accessories | Battery/Fast Charge Hub
Rechargeable Lithium Polymer Battery & Fast Charge Hub
Charge 3 batteries simultaneously.
Working Temperature: 5°C-40°C
(Charging may be slower when used below 10°C)
Clear Charge Indicators
Fast Charge Hub
Specifications
Material: PC
Weight: 85.3g
Dimensions: 74*60.3*30 mm
Power input: 9V/2A 5V/2A
Charging: Type C
Compatibility: Insta360 ONE X2 Battery
In the Box
1x Charge Hub
1x Cable
1x User Guide
Rechargeable Lithium Polymer Battery
Backup or replacement battery for ONE X2
Important notes
1. Always use an Insta360 approved adapter or Fast Charge Hub to Charge ONE X2 batteries.
2. Acceptable battery charging temperatures range from 0℃-40℃ (32℉-104℉).
3. Insert the battery into the Fast Charge Hub's battery slot with the battery's charging point lined up on the same side of the status indicators.
4. A 9V/2A power adapter is suggested. Using an adapter above 9V/2A may not increase the charging speed; When an adapter below 9V/2A is used, the hub will not be able to charge three batteries at the same time, which leads to a longer charging time.
Insta360 ONE R Dive Case
Insta360 ONE R Accessories | Action Camera Dive Case
(For 4K Wide Angle Mod / 1-Inch Wide Angle Mod / Dual-lens 360 Mod)
For Wide Angle Mod (4K / 1-Inch)
IPX8 water-resistant, protecting your ONE R for deep-water diving
|
Dive Case for Wide Angle Mod: Water Proof up to 60 meters (196 ft) |
Dive Case for Dual-Lens 360 Mod: Waterproof up to 30 meters (98.4 ft). Must be used with the Vertical Battery Base |
How to use
Note: The following instructions use the Dive Case for 1-inch wide mod as an example.
1. Open the case
Hold the dive Case with the arrow pointing to your left, as shown.
Push the lock lever to the left (1),
then pull down from the second arrow (2). Remove it from the hook (3). When the buckle is completely disengaged, open the Dive Case.
2. Insert the Camera
Be sure to insert the camera in the correct direction.
* When using the Dive Case for 1-inch Wide Angle Mod,
remove its protective lens first.
When using the camera in water, please lock the touch screen to avoid accidental presses.
When inserting the camera, take care not to scratch the lens.
3. Attach the Anti-Fog Inserts
Ensure that anti-fog inserts are inserted as shown below.
* When using the third-party anti-fog inserts, ensure that the size is within 25x16x1 mm.
If the anti-fog inserts are too large, they will cause water leakage, damaging the camera.
4. Close the Case
To close the Dive Case, latch the buckle with the hook and push the buckle until it clicks.
* Ensure the Dive Case is firmly closed. Be sure that the parts of the Dive Case in contact with its rubber seal are free of dirt or dust.
For the best results, keep the lenses of the Dive Case clean.
5. Attach the Stability Pads
When connecting the Dive Case to other accessories, such as the floating hand grip, be sure to stick a stability pad to the screw points.
Insta360 ONE R Dive Case
Insta360 ONE R Accessories | Action Camera Dive Case
(For Dual-Lens 360 Mod (Dive Case only))
|
Purpose-Built Dome Lenses Seamless underwater stitching |
30 m (98.4ft) Waterproof depth |
Standard 1/4" Mount Ready for anything |
*Bottom obstruction coverable by logo in app or by reframing your shot.
Explore deeper.
Perfect for diving and other underwater uses.
This version of Insta360 ONE R diving box supports the dual-lens 360 Mod of the vertical ONE R camera system, which is designed for underwater 360-degree video and photo shooting.
This diving box requires the use of Insta360 ONE R vertical battery base accessories. Once assembled into the camera core module and dual-lens 360 modules, the camera components can be inserted into the diving box.
This high-quality diving room allows you to explore depths up to 30 meters (98.4 feet), which is perfect for deep water snorkeling or scuba diving. There is a standard 1/4-20" threaded mount at the bottom of the diving box, which can be matched with almost any handle mount.
How to use
1. Build ONE R
Remove the Core's lock cover and place into the slot on the Vertical BNattery Base.
* Assemble all parts and press them together until they connect firmly.
Designed for ONE R Vertical Battery Base.
The Vertical Battery Base is sold separately.
2. Open the Case
Push up the lock lever to the Dive Case(1),
then pull down from the second arrow (2). Remove it from the hook (3).
When the buckle is completely disengaged, open the Dive Case (4).
3. Insert the Camera
Be sure to insert the camera in the correct direction.
* Lock the touch screen to avoid accidental presses.
When inserting the camera, take care not to scratch the lens.
4. Attach the Anti-Fog Inserts
Insert the 3 anti-fog inserts as shown below.
* When using the third-party anti-fog inserts, ensure that the size is within 25x16x1 mm for the lid inserts and 32x16x1.5 mm for the main body inserts.
If the anti-fog inserts are too large, they will cause water leakage, damaging the camera.
5. Close the Case
To close the Dive Case, latch the buckle with the hook and push the buckle until it clicks.
* Ensure the Dive Case is firmly closed and free of dirt or dust.
For the best results, keep the lenses of the Dive Case clean.
Please read the product manual in the box before using the dive case.
Specifications
Compatibility: Insta360 ONE R Dual-Lens 360 Mod with Vertical Battery Base
Weight: 159g
Size: 144 x 81 x 78.5 (mm)
Working Temp: 59° to 77° F
Waterproof Depth: Up to 30m (98.4ft)
Insta360 GO 2 Pet Strap Mount
Insta360 GO 2 Accessories | Pet Strap Mount
Capture the world from your pet's perspective | Adjustable, soft, and lightweight | Slot the GO 2 Pivot Stand right into the strap's pocket
RESTOCKING: Product will be back in stock mid-Feb. Accepting pre-orders now.
*It is recommended to fix the mount onto a pet harness or pet's clothing for more stabilized shooting.
Fits Fido and Garfield
Adjust the mount to fit your pet with the velcro strap.
Pet-approved comfort
GO 2, the Pivot Stand and Pet Strap Mount together weigh only 85g（3oz）.
Spec
Material: PU leather and elastic velcro
Color: black
Weight: 31 grams (standalone)
Total length: 51.5 cm (20.3 inches)
Maximum use length: about 45 cm (17.7 inches)
Minimum use length: about 35 cm (13.8 inches)
Compatibility: GO 2 Pivot Stand
Notes
Insta360 GO 2 Pivot Stand
Insta360 GO 2 accessories| Pivot Stand
Insta360 GO 2 Pivot Stand allows you to install the GO 2 action camera on almost any surface, and can also double as a handle, making shooting easier.
You can mount Insta360 GO2 to any surface.
Doubles as a handle.
Main feature
- Adhere to the smooth surface
- Used as a handgrip support
- Rotate to desktop standing mode
- Can be used underwater
*The Pivot Stand can only be stuck to flat surfaces that are dry and clean.
Insta360 GO 2
Carry Case
Specially designed for GO 2
Keep everything perfectly in place and well-protected.
Everything has its place
Includes an extra compartment for accessories like the Charge Cable and Magnet Pendant.
Compact and durable
Perfect for outdoor shooting, travel, and more!
Specs：
Size：210mm*120mm*55mm*
Color： Grey
Weight：193g
Material： Fabric
Insta360 ONE R Vertical Bumper Case
Insta360 ONE R accessories | Vertical Bumper Case
The Insta360 ONE R Vertical Bumper Case is a vertical protective shell.
It provides a through-hole at the bottom for fixing the selfie stick to the optional vertical battery base and allows you to control all the buttons of the camera in the vertical setting.
Feature
- ONE R & Vertical Battery Base Shell
- Selfie stick through the hole
Designed for ONE R Vertical Battery Base.
The vertical Battery Base is sold separately.
Instructions
1. Install
Remove the Core's Lock Cover and place it into the slot on the Vertical Battery Base.
2. Build ONE R with Vertical Battery Base
3. Buttons should be aligned correctly
4.Insert ONE R
Insert ONE R into the case from the bottom first and then the top.
5. Assembled successfully! Make sure the cameras have been inserted completely before use.
*"The 1/4" mounting point of the Vertical Battery Base and the Vertical Bumper Case should be aligned correctly.
*The Vertical Bumper Case is not designed to be used in extreme action environments or in water. ONE R is not waterproof when built with the Vertical Bumper Case. Please use with caution.
6.拆除
Remove the camera out of the case from the top first and then the bottom.
Please read the product manual in the box before using the Vertical Bumper Case.
Insta360 GO 2 ND Filter Set
Insta360 GO 2 accessories｜ND Filter Set
Easy screw-in installation
The set contains: 1 ND8, 1 ND16, 1 ND32 and 1 ND64 filter for Insta360 GO 2.
The ND filter designed by Freewell Gear can be attached to Insta360 GO 2.
After installing, you can get a balanced color and contrast, full of the cinematic lenses even in brighter light.
feature
ND8
3 stops
ND16
4 stops
This filter reduces light hitting the sensor by 4 stops. Ideal for bright lighting conditions. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
ND32
5 stops
This filter reduces light hitting the sensor by 5 stops for very bright environments. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
ND64
6 stops
This filter reduces light hitting the sensor by 6 stops for extremely bright lighting conditions. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
Built for Insta360 GO 2
適Made for a variety of tough, bright lighting conditions.
Balanced contrast and color
Cinematic highlights.
高High-quality optical glass
16-layer scratch-resistant coating.
Snug fit
Easy screw-on installation.
Size: 3.11 x 3.07 x 0.91 inch
Insta360 GO 2 Lens Guard
Insta360 GO 2 Action camera accessories | Lens Guard
Specially designed for Insta360 GO 2 sports camera accessories
Designed with hardened glass and an anti-fogging protective coating.
High definition and light transmittance, showing real camera lens color and image quality.
Insta360 GO 2 camera fits accurately and fully covers the camera lens to prevent scratches, dust, oil, and fingerprints on the camera lens.
Guidelines for replacing the lens protector
1. Twist the lens guard counterclockwise to remove it.
2. Twist the lens guard clockwise to secure onto the lens.
Note
- Before use, please make sure that the rubber ring of the lens protection lens and the lens are clean and dry. Be sure to install the lens protector in a clean and dry environment. Any dust or dirt on the lens or lens protector may affect the shooting effect.
- Before using it underwater, be sure to install the GO 2 lens protector. Without the lens protector, GO 2 is not waterproof. Please securely tighten the lens protector to prevent image quality problems.
Insta360 ONE R Vertical Battery Base
Insta360 ONE R accessories | Vertical Battery Base
Insta360 an R vertical battery base allows you to set up the ONE R camera vertically for a variety of applications, including mounting on the optional ONE R drone mount.
The Core module is installed on the top of the base, and the lens module is installed on the top of the Core. Compatible with all lens modules, including: 360 Mod, 1" Mod and 4K Mod.
The base and Insta360 ONE R camera can be further installed in the vertical bumper shell, which can neatly wrap the entire device.
The vertical battery base provides a 1/4"-20 tripod mount at the bottom, and an optional bumper housing allows access to the threaded mount.
Only when the 360 Mod is installed in the optional ONE R Dive Case for Dual-Lens 360 Mod, the vertical battery base can be used for underwater activities.
Dive Case is a vertical diving case specially designed for this type of setup.
There is a USB Type-C interface on the top of the vertical battery holder to connect to the Core module, and there is a USB Type-C charging interface with a charging indicator on the side.
The side port is only for charging and does not support data transmission or ONE R microphone adapter.
Use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod or for vertical handheld shooting.
Max Charging voltage: 4.4V
Rated capacity: 1190mAh
Rated power: 4.58Wh
Note
- Designed for use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod, or for vertical handheld shooting. Avoid using it in high-action environments or in water. For select action environments, you can use the Vertical Bumper Caser (sold separately).
- Insta360 ONE R is not waterproof when using the Vertical Battery Base without the Dive Case for Dual- Lens 360 Mod.
- The Vertical Battery Base does not support the Mic Adapter or Transfer Cable. The port is for charging only.
- The Vertical Battery Base works with any Insta360 ONE R Mod, not just the Dual-Lens 360 Mod.
- The USB Type-C Male Port connects to the Core's USE Type C port to deliver power to the Core (Before use, remove the lock cover on the Core).
Insta360 ONE R 4K Wide-Angle Mod
Insta360 ONE R accessories| 4K Wide-Angle Mod
Insta360 ONE R 4K wide-angle module for modular ONE R action camera system.
Main feature
- Interchangeable modules for ONE R system
- Up to UHD 4K60, 4000 x 3000 30 fps
- 4000 x 3000 DNG, JPEG, and original photos
- FlowState image stabilization
- Supports optional 197' diving box
Capture images up to UHD 4K at 60 fps and 4000 x 3000 resolution at 30 fps.
It also shoots DNG, JPEG, and original photos at a resolution of 4000 x 3000 at 4:3 and 4000 x 2250 at 16:9.
。
When the 4K module is paired with the core module, the touch screen real-time view display of the core module can be used as a front or rear lens, allowing you to shoot standard 4K videos as well as selfies and video blog videos.
The 4K mod also has FlowState stabilization, which uses scene detection algorithms to stabilize your shots, so they look more balanced and professional.
Like all other modules, the 4K module is waterproof to 16' when assembled with the core module, battery base and mounting frame, without the need for a waterproof enclosure. For deeper waters, a 197' diving box dedicated to this module can be selected.
Specification
- Focal length: 16.4mm
- Maximum aperture: f/2.8
Record
-
DNG / JPEG / 原始 (4000 x 3000)
-
DNG/JPEG/Raw (4000 x 2250)
-
4000 x 3000 30 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
3840 x 2160 30/60 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
2720 x 1530 在 30/60/100 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
1920 x 1080 在 30/60/120/200 fps（100 Mb/s H.264/AVC、H. 265/HEVC）
General information
- Weight: 0.25 ib
- Size (LxWxH): 6.5 x 3.8 x 2.1"
Insta360 ONE X high-definition anti-vibration virtual tour
Main Function
FLOW-STATE Shockproof Technology
HD quality
Invisible selfie stick
HDR photo+video
Banlance light and dark
ONE X supports HDR movies, retaining more light and shadow details in bright and dark parts, making the transition between light and dark more natural and presenting a more realistic visual effect.
Shooting drift angle of view
With special drift accessories, it can take professional slow-motion moving pictures.
Movement delay
Other functions:
Easy editing function
Bullet time
Combined with the new bullet time rope box, ONE X can achieve movie-level low-altitude surround special effects blockbusters. Horizon level calibration, intelligent adjustment of speed, a light shake, slow freeze frame the wonderful moment.
Record exercise data
The battery can be replaced
Support Wi-Fi and wired transmission
Has high impact resistance
Perfect stitching effect
.
.
Specification
Photo resolution: 18MP (6080*3040)
Video resolution: 5760*2880@30fps, 5760*2880@24fps, 5760*2880@25fps, 3840*1920@50fps, 3840*1920@30fps, 3008*1504@100fps
Photo format: insp, jpeg (can be exported via App), RAW (dng) (this mode only supports editing on PC/Mac)
Video format: insv, mp4 (can be exported via App), LOG (this mode only supports editing on PC/Mac)
Video encoding: H264 Video code rate: maximum 100Mbps
Gyroscope: six-axis gyroscope
Compatible equipment:
- iPhone 11/11 Pro/11 Pro Max, iPhone XS/XS Max, iPhone XR, iPhone X, iPhone 8/8 Plus, iPhone 7/7 Plus, iPhone 6s/6s Plus, iPhone SE 2, iPad Pro, iPad (2018)
- HUAWEI: P20 Pro/P10/P9/Mate 9/Mate 10/Honor 9
- Samsung: S9/Note 8/S8/S7/S7 Edge
- XIAOMI: Mix/Mix2/Note3/6/8
- OnePlus: 5t
- Google：Pixel/Pixel 2
- Vivo: X9Plus L
- OPPO: R11
Video mode: normal mode, delay mode, bullet time, HDR video, log 360 video
Live broadcast mode: 360° live broadcast, free choice of viewing angle live broadcast
Exposure compensation: -3EV~+3EV
Exposure mode: automatic, manual (shutter 1/8000s-55s, ISO 100-3200), shutter priority (1/8000s-2s), ISO priority (100-3200)
White balance: automatic, cloudy, sunny, fluorescent, incandescent
Weight: 90.9 grams (without battery); 115 grams (single battery)
Dimensions: 115 mm x 48mm x 28mm (D x W x H)
Wi-Fi: 5G (standard range is about 20 meters)
USB: MicroSD card
Micro card: Recommend UHS-I V30 and above, exFAT (FAT64) format (maximum storage capacity is 256G)
Charging method: Micro USB
Charging time: 5V2A charger (100 minutes) or 9V2A official charger (60 minutes)
Endurance time: shooting 5.7K @30FPS or 4K@50FPS independent use of the video, lasting about 60 minutes
Use environment: standard battery (suitable for 0℃~40℃); low temperature battery (suitable for -20°C~30°C)
Insta360 GO 2 Dive Case
Start your water-based adventures by using
Insta360 GO 2
Dive Case
IPX 8 waterproof to depths of 45 m
Protect your GO 2 action camera on all your water-based adventures
How to use it
1. Open the Case
Push the lock block (1) in the direction shown in the figure. After locking, remove the hook (2).
2. Attach the Anti-Fog Inserts
Attach the anti-fog inserts into the buckle on the backside of the Dive Case door, as shown.
3. Insert the Camera
4. Close the Case
Specs: